MMF200ZB060
MacMic MMF200ZB060 600V 200A FRED module with fast recovery for high-frequency rectification applications.
Product Overview
Description
This FRED module provides 200A current capability with fast recovery time of 35ns typical, minimizing switching losses.
Features soft recovery characteristics to reduce EMI and voltage overshoot in high-frequency circuits.
Ideal for use as output rectifiers in SMPS, freewheeling diodes in motor drives, and snubber circuits.
Product Series
Primary Application
Key Features
- 200A current capability
- 35ns fast recovery
- Soft recovery characteristics
- Low switching losses
- TO-247 package
Specifications
| Repetitive Peak Reverse Voltage (Vrrm) | 600V |
|---|---|
| Average Forward Current (If) | 200A |
| Forward Voltage (Vf) | 1.35V typical |
| Reverse Recovery Time (trr) | 35ns typical |
| Reverse Recovery Charge (Qrr) | 2.5μC typical |
| Operating Temperature | -40°C to +150°C |
| Package | TO-247-2 |
| Technology | FRED |
| Reverse Voltage (Vrrm) | N/A |
| Forward Current (If) | N/A |
| Recovery Time (trr) | N/A |
| Voltage Rating | N/A |
| Current Rating | N/A |
| Temperature Range | N/A |
Applications
SMPS Output Rectifiers
Industrial application for 200A 600V FRED Module
Freewheeling Diodes
Industrial application for 200A 600V FRED Module
Snubber Circuits
Industrial application for 200A 600V FRED Module
High-Frequency Rectification
Industrial application for 200A 600V FRED Module
FAE Expert Insights
"The MMF200ZB060 is an excellent FRED module that I frequently specify for high-frequency rectification applications. The soft recovery characteristics significantly reduce EMI and switching losses compared to standard recovery diodes. In my experience, this module performs exceptionally well when paired with MacMic IGBT modules in welding power supplies. I recommend using this FRED module for applications switching above 20KHz where fast recovery is essential."
Soft recovery FRED module ideal for high-frequency rectification
— David Chen, BeiLuo
Frequently Asked Questions
What is the recovery time?
Typical reverse recovery time is 35ns.
Suitable for high-frequency applications.
What is the forward voltage?
Typical forward voltage is 1.35V at rated current.
Consider in conduction loss calculations.
How do I select the right product for my application?
Selecting the right product involves analyzing your application requirements including voltage, current, switching frequency, and thermal conditions. Consider the maximum voltage stress, continuous and peak current requirements, and switching speed needs. Our FAE team can provide detailed selection guidance based on your specific application parameters including load characteristics, duty cycle, and environmental conditions.
Provide your application requirements to our FAE team for personalized product recommendations.
What is the recommended gate drive for this IGBT/MOSFET?
Proper gate drive design is critical for optimal performance. I recommend using gate drivers with adequate output current capability (typically 2-4A for medium power devices). Gate resistor selection depends on switching frequency and EMI requirements - typically 5-15Ω for IGBTs and 10-47Ω for MOSFETs. Include negative gate voltage (-5V to -8V) for IGBTs to prevent false turn-on. For high-frequency applications, minimize gate loop inductance and use Kelvin source connections when available.
Contact our FAE team for gate drive design recommendations specific to your application.
What thermal management is required for this product?
Effective thermal management is essential for reliable operation. Use thermal interface material with thermal conductivity of at least 3 W/mK between the module and heat sink. Ensure adequate heat sink sizing based on your maximum power dissipation and ambient temperature. I recommend maintaining case temperature below 85°C for long-term reliability. For high-power applications, consider forced air cooling or liquid cooling solutions. Thermal modeling can help optimize your thermal design.
Perform thermal calculations or contact FAE for thermal design assistance.